SW405K Wheel Loader | SANY America

SW405K

40,786 lbs

The SW405K features a reinforced structural design that’s built to take on the toughest work, including heavy-duty mining operations. It offers an impressive service life reaching 10,000 hours, and boasts a 360-degree camera, better ergonomics to lessen fatigue and features like USB port and keyless entry. The high-pressure, load sensing hydraulics provide a balance of speed and power. The Z-bar linkage design delivers 40,466 lbf of breakout force.

The 228-net horsepower with almost 40,000 lbs of breakout force and bucket capacity of 4 cubic yards

Tight turning radius coupled with fast cycle times with return to dig functionality means you’ll spend more time working and less time maneuvering.

Keep more material in the bucket with the SANY boom suspension

Time-tested components such as the Eaton load sensing steering valve, Dana axles and brakes

Features and Specifications

Technical Spec Sheet Family Brochure

SANY in Action

YOU RELY ON YOUR EQUIPMENT TO HIT DEADLINES AND KEEP YOUR CREW MOVING.

The SANY Dealer Partner network offers quick access to all the components and parts you need...
keeping your uptime high and working to get you replacement parts fast.

Find a Dealer Near You

Engine Model	Deutz TCD6.1
Max Gross Power	262 hp
Net Engine Power	228 hp
Max Gross Torque	965 lbs ft
Displacement	476 in³

Bucket Capacity	4.0 yd³
Breakout Force	40,466 lbf
Tipping Load Straight	31,967 lbs
Tipping Load @ Full Term	28,881 lbs
Clearance (full lift 45º dump)	10' 2"
Reach (full lift 45º dump)	3' 11"

Max Flow	81 GP
Max Pressure	4,061 PSI

Raise	5.4 sec
Dump	1.9 sec
Float Down	3.3 sec
Total Cycle Time	10.6 sec

Fuel Tank	79.3 gal
Cooling Systems	11.4 gal
Engine Crankcase	6.1 gal
Transmission	9.2 gal
Front Axle	7.4 gal
Rear Axle	7.4 gal
Hydraulic Tank	76.6 gal
DEF Tank	5.3 gal

Shift Modes	Automatic, Manual, Kick-Down
Forward Gear 1-4	4–25 mph
Reverse Gear 1-4	4–16 mph

Front Axle	Fixed
Traction Aid	Manual Differential Lock
Rear Axle	Oscillating
Traction Aid	Open Differential
Service Brakes	Wet Disc
Parking Brake	Disk Brake

Ground Clearance	430 mm1' 5"
Height to Top of Cab	3,580 mm11' 9"
Center Line of Rear Axle to Edge of Counterweight	2,335 mm7' 8"
Wheelbase	3,200 mm10' 6"
Center Line of Front Axle to Center Pivot	1,600 mm5' 3"
Shipping Length without Attachments	7,040 mm23' 1"
Shipping Length with Bucket	8,180 mm26' 10"
Max. Dump Height	5,415 mm17' 9"
Hinge Pin Height at Max. Lift	4,145 mm13' 7"
Dump Clearance at Max. Lift	3,090 mm10' 2"
Dig Depth, Level Bucket	30 mm1.2"
Reach at Max. Lift and 45º Discharge	1,185 mm3' 11"
Roll Back at Max. Lift	58º
Dump Angle at Max. Lift and Dump	45º
Roll Back at Carry Height	50º
Roll Back at Ground	45º
Tail Angle to the Rear Wheel	27º
Clearance Circle to Outside of Tires	5,635 mm18.6"
Clearance Circle to Counterweight	5,911 mm19' 5"
Max. Circle	6,465 mm21' 3"
Width	2,200 mm7' 3"
Articulation Angle	+/- 40º